Cisco Related by MindLeaders CCNA 640-802 - Online Course

The Cisco Certified Network Associate (CCNA) certification is Cisco’s popular networking certification that tests a network administrator’s ability to set up and maintain network systems. Candidates for the CCNA can qualify for the certification by passing one test, 640-802, or two tests, 640-816 and 640-822. This study guide prepares you for the 640-802 test. Practice exams are also included, which will allow you to answer questions in the same format that the test will use on exam day, and will provide in-depth instructional feedback on each question to thoroughly cover every subject you'll need to master.

This series is for anyone who wants to achieve CCNA 640-802 certification. This online course contains 16 lessons and 3 practice exams and should take approximately 19 hours to complete.

Lesson 1: Networking Fundamentals (1.0) hour

Networking Fundamentals teaches you how to identify network technologies, and describe Ethernet concepts. This course provides a foundation of networking fundamentals in preparation for the CCNA 640-802 exam. Topics include Networking Fundamentals.

Lesson 2: Network Models (1.0) hour

Network Models teaches you how to identify protocols and their port numbers, describe the encapsulation and decapsulation process, and define network processes related OSI model layers. This course provides an introduction to network models in preparation for the CCNA 640-802 exam. Topics include Network Models.

Lesson 3: Concepts in IP Addressing (1.0) hour

Concepts in IP Addressing teaches you how to identify the Address Class and Default Mask, and determine Host and Subnet Requirements. This course provides information on IP addressing in preparation for the CCNA 640-802 exam. Topics include Concepts in IP Addressing.

Lesson 4: Working with Cisco Equipment (1.0) hour

Working with Cisco Equipment teaches you how to navigate the Cisco IOS Command Line Interface, assign IP Addresses, and enable an Interface. This course provides information on working with Cisco equipment for the CCNA 640-802 exam. Topics include Working with Cisco Equipment.

Lesson 5: Managing Your Router (1.0) hour

Managing Your Router teaches you how to use Telnet and Secure Shell (SSH), describe IOS Naming Conventions, and back Up and Restore Your IOS and Configuration. This course provides information on managing routers for the INCD1 640-822 exam. Topics include Managing Your Router.

Lesson 6: Basic Catalyst Switch Operations and Configuration (1.0) hour

Basic Catalyst Switch Operations and Configuration teaches you how to identify the benefits of bridges and switches, configure switch ports, and connect switches. This course provides information on basic catalyst switch operations and configuration for the CCNA 640-802 exam. Topics include Basic Catalyst Switch Operations and Configuration.

Lesson 7: Introduction to WANs (1.0) hour

Introduction to WANs teaches you how to configure PPP, configure Frame Relay, and configure NAT. This course provides an introduction to wide area networks for the CCNA 640-802 exam. Topics include Introduction to WANs.

Lesson 8: Wireless LANs (1.0) hour

Wireless LANs teaches you how to identify the differences between wireless LAN standards, describe the differences between WLAN modes, identify security threats specific to WLANs and techniques to mitigate them, identify the basic configuration steps for installing and using a wireless access point, and identify the differences between BSS and ESS. This course provides an introduction to wireless LANs for the CCNA 640-802 exam. Topics include Wireless LANs.

Lesson 9: Basic Network Security (1.0) hour

Basic Network Security teaches you how to describe the importance of security policies, and define basic mitigation steps. This course provides an introduction to basic network security for the CCNA 640-802 exam. Topics include Basic Network Security.

Lesson 10: Basic Routing (1.0) hour

Basic Routing teaches you how to define dynamic routing algorithms, describe the use of Administrative Distances, configure static routes, and configure RIP. This course provides an introduction to basic routing concepts for the CCNA 640-802 exam. Topics include Basic Routing.

Lesson 11: Small-Office Internet Connection (1.0) hour

Small-Office Internet Connection teaches you how to use the SDM interface to configure a default route, use the Cisco SDM interface to configure NAT and DHCP, describe IP Subnetting, and test and troubleshoot LAN and WAN connectivity. This course covers small office Internet connection concepts found on the CCNA 640-802 exam. Topics include Small-Office Internet Connection.

Lesson 12: Advanced Catalyst Switch Operations and Configuration (1.0) hour

Advanced Catalyst Switch Operations and Configuration teaches you how to identify Root, Designated, and Blocked ports in a system, assign Switch Ports to VLANs, configure Trunk links, create and join a VTP Domain, and troubleshoot VTP and Inter-VLAN routing. This course covers advanced catalyst switch operations and configuration concepts found on the ICND2 640-816 exam. Topics include Advanced Catalyst Switch Operations and Configuration.

Lesson 13: IP Access Lists (1.0) hour

IP Access Lists teaches you how to configure standard, extended, and named ACLs, and troubleshoot standard, extended, and named ACLs. This course covers IP access list concepts found on the CCNA 640-802 exam. Topics include IP Access Lists.

Lesson 14: Advanced Routing (1.0) hour

Advanced Routing teaches you how to configure EIGRP, and configure OSPF. This course covers advanced routing concepts found on the CCNA 640-802 exam. Topics include Advanced Routing.

Lesson 15: Advanced WANs (1.0) hour

Advanced WANs teaches you how to configure PPP (point-to-point), configure Frame Relay, describe components of IPsec VPNs, and identify uses of SSL VPNs. This course covers advanced WAN concepts found on the CCNA 640-802 exam. Topics include Advanced WANs.

Lesson 16: Advanced IP Concepts (1.0) hour

Advanced IP Concepts teaches you how to describe advanced subnetting, interpret an IP route table, configure NAT and PAT, and recognize and compress IPv6 addresses. This course covers advanced IP concepts found on the CCNA 640-802 exam. Topics include Advanced IP Concepts.

3 Practice Exams

This course presents questions that will help you prepare for the Cisco CCNA 640-802 exam. The feedback for each question provides in-depth background on the topic, including why each incorrect option was wrong and what to look for in correct answers.